Ajax MultiTransmitter-Module for integrating wired third-party devices into Ajax. Supports NC, NO, EOL, devices (44951B)
Out of stock
MultiTransmitter
A module for integrating third-party wired devices into Ajax.
Wired alarm renovation
Tens of detectors and kilometers of wire can now effortlessly be transformed into a modern smartphone-controlled security system. Replacing the old security control panel, the module connects wired devices to a hub and makes them a full-fledged part of Ajax. MultiTransmitter is a step towards awareness and reliability. For a security company, it opens the possibility to configure the equipment remotely, and users get all the benefits of managing the system through an app.
More Ajax features
IR barriers, household gas, temperature, liquid level detectors, and much more — with MultiTransmitter, these devices are ready to expand the Ajax areas of use. And wired connectivity and support of international security industry standards ensure full compatibility.
New features of old devices
MultiTransmitter has 18 wired zones, each of which can be configured in the Ajax app. The detectors connected to the zones can be active 24/7, operate with entering or exiting delay, activate sirens if necessary, and participate in automation scenarios. With MultiTransmitter, the old alarm system becomes part of a secure and smart home.
Data-rich alarms
With MultiTransmitter, you can specify the type of alarm and a room for each wired device. This makes notifications more informative — you know not just what happened but where. This information is displayed using push notification, SMS, and is also sent to the security company’s monitoring station under an appropriate code. A total of five types of alarms are available: intrusion, fire, medical assistance, panic button, gas alarm.
Radio communication without reliability compromises
MultiTransmitter communicates with a hub via an encrypted Jeweller radio protocol. This is a TDMA technology developed by Ajax Systems for uninterrupted communication with devices. Jeweller detects jamming attempts, switches to the backup frequency in case of interference, and allows Ajax wireless devices to run on battery power for years.
Security without barriers
When using ReX range extenders, Ajax security system’s radio network can cover up to 35 km2. But if some rooms are impermeable for radio waves, connecting wired devices via MultiTransmitter is the best solution. The length of wires can reach 400 meters.
Protected against sabotage
MultiTransmitter will inform you instantly if the connected devices have been interrupted with power failure, disconnection of the signal cable, or tampering. Electricity loss at the site will not be a problem either — the backup battery can provide power to devices for up to 4 days. MultiTransmitter body itself is equipped with two tampers that respond to removal of the integration module from the mount and removal of the lid.
- Instant connection loss detection with wired device (EOL)
- Cavity in the body for a backup battery 7 A⋅h
- 2 tampers that detect dismounting and opening of the body
Made by professionals for professionals
We made sure that the installation and setup process does not require any extra time or effort. Like other Ajax devices, MultiTransmitter connects to a hub in the app by scanning a QR-code. When connecting wired devices, you don’t need to know the resistors’ resistance values. The system will also warn you if a device was not connected correctly.
- Adding to the system by scanning QR-code
- Connecting wired devices
- Wall mounting
- In-app configuring
| Number of alarm/tamper zones | 18
|
| Supported detector contact types | NO, NC (without R), EOL (NC with R), EOL (NO with R) |
| Resistance of the EOL resistor | 1 kΩ to 7.5 kΩ |
| Alarm signals processing mode | Pulsed or bistable |
| Main power supply | 110–255 V, 50/60 Hz
|
| Backup power |
12 V DC |
| Supported battery type | Battery with 4 or 7 A⋅h capacity (not included) |
| Detector power supply | 12 V DC, up to 1 A for all detector power supply outputs |
| Protection against dismantling | Tamper |
| Radio signal frequency band | 868.0–868.6 MHz or 868.7–869.2 MHz, depending on the sales region |
| Compatibility |
Operates with all Ajax hubs, range extenders
|
| Maximum radio signal power | Up to 7.29 mW (25 mW limit) |
| Radio signal range | Up to 2,000 m in the line of sight |
| Operating temperature range | From -10°С to +40°С |
| Operating humidity |
Up to 75% |
| Dimensions |
196 × 238 × 100 mm |
| Weight | 805 g |
| Complete set
|
MultiTransmitter board |
| Brand |
Ajax |
|---|---|
| Classification |
Radio channel relay unit |
| Device type |
Remote-controlled |
| Installation method |
Into wall plate |
| Compatibility |
Operates with all Ajax hubs, and range extenders |
| Actuating element |
Relay |
| Maximum load current |
13 A |
| Electric power meter function |
Available |
| Power supply |
110−230 V±10% 50/60 Hz |
| Alarm signal delivery time |
0.15 s |
| Weight |
30 g |
Free shipping is valid now on select in-stock items while supplies last, with a qualifying subtotal order of £200 or more. Orders can be combined with any other offers, promotions, or discounts. The free shipping offer is automatically applied at checkout when the cart subtotal meets the qualifying threshold. Furthermore, Trader customers can see more discounted prices for all products.
Full payment must be received before delivery can be arranged for any goods ordered from CUCCTV We accept payments from PayPal or credit /debit card. For security reasons and to protect our customers when payment is made by card, CUCCTV will only deliver goods to the address where the card is registered only for first time order .
Orders received by CUCCTV before 4pm on a working day will be dispatched on the same day using Parcel Force 24 and will normally be delivered on the next working day. A working day is Monday to Friday excluding Bank Holidays. Deliveries to Northern Ireland will take longer. Most of our deliveries are received on the day after dispatch, however Parcel Force 24 is NOT guaranteed next day delivery and CUCCTV shall not be responsible for any costs or inconvenience incurred arising from late delivery of goods.
We do not dispatch website orders for delivery over the weekend, so if you order during the weekend the order will be dispatched on Monday.
The vast majority of CUCCTV deliveries are received without incident, however if you should incur problems please notify us within 2 working days to allow us to help. Insurance is included in our delivery prices and you will be asked to sign for your goods upon delivery.
When signing you are confirming that the goods have been received in good condition. If you do not check the goods please write ‘unchecked’ on the paperwork. Please refuse delivery of any package which does not appear to be in good condition unless you have checked the contents and are happy to accept them. If you are not available to sign for the goods Parcel Force will leave a calling card informing you of where you can collect your parcel and a telephone number to call if you prefer to arrange rede
