EVGAFF 7KW European Standard EV Charger (wall-mounted set Socket)

£390.00 inc. VAT

EV7KW-Socket

  • Input power supply
    230VAC ±10% 32A, 1-Phase L+N+PE, 50/60Hz
  • Environment:
    Indoor or outdoor, IP55, -30℃ to 50℃, max.95%RH
  • Ventilation: Not supported

Tools:

  • Pencil or marker
  • Impact drills
  • Drill 160mm x Φ6mm
  • Phillips screwdriver
  • Small falt screwdriver (for rotary switch)
  • Power cord with cold terminals RNL5-4
  • Wire stripper, Crimping plier
  • Match the power cord from AWG#10 to max AWG#8
    Power cord type: single core / multi-strand / flexible / flexible with
  • ferrules.
    Cord diameter: 13.5mm to 18mm
    4x Expansion bolts Ф6mm x 60mm (In the accessory pack)

In stock

SKU: EV7KW-Socket Categories: ,
Description

EVGAFF 7kW Home AC Charger provides to the market a full range of AC charging meeting global standards. 100% in-house design and production enable us to meet the market’s requirement of short lead-time delivery, professional service and fast reaction to design upgrades. We carry out tough mechanical tests to all the designs to ensure the AC charger has a long lifetime.

 

 

Installation instructions

  • The place where charging facilities are used should ensure that there is sufficient power connected to the load capacity, and that the voltage drop and power quality meet the standards.
  • The site selection and installation construction of charging facilities should comply with standards, and professional personnel and qualified construction units should be selected.
  • The installation environment of charging facilities should match the protection level of the charging facility casing, avoiding explosive environments such as moisture, water accumulation, dust, and heat sources as well as corrosive environments。
  • The cables, terminals, and other components selected for installation should meet the current requirements. Before and after installation, it should be ensured that all wiring related to the charging equipment is tight and well-insulated, otherwise, there is a risk of fire and electric shock.
  • Before powering on the equipment, please ensure that it is grounded properly to avoid electric shock accidents;
  • If any damage is found to the pile body, please immediately stop installation and use
  • Non-professional personnel are prohibited from dismantling the charging station
  • Prohibit children from touching the charging station.

Specifications

 AC input specifications
Parameter Specification
Input AC power connection 1 phase
Input voltage (1 phase) 220 to 240 VAC
Input current 32 A
Earth fault protection 30 mA AC, 6 mA DC
AC output specifications
Parameter Specification
AC output voltage range 220 to 240 VAC
AC output current 10A, 16A and 32A
Connection standard Type-2 cable
IEC 62196
Maximum output power 7.4 kW
Network interface
Parameter Specification
Connectivity (optional) GSM, 4G, LTE
WiFi (WAN) IEEE 802.11 b/g/n
Bluetooth BLE 5.0
Specifications
Reviews (0)
Shipping & Delivery